Gen-Y Hitch GH-0100 Adjustable Drop Hitch Stabilizer Kit for 2 Receiver 10K 16K

  

Gen-Y Hitch GH-0100 Adjustable Drop Hitch Stabilizer Kit for 2 Receiver 10K 16K. Gen-Y Adjustable Drop Hitch Stabilizer Kit for 2 Receiver 10K 16K Tow Hitches.

This stabilizer kit contains screw style bars that provide a very rigid stabilizer system. After the kit has been installed, the drop hitch is tightened, therefore eliminating any slop or wobble in the drop hitch system.

The kit includes the adjustable stabilizer bar kit and all mounting hardware. GEN-Y recommends to bolt/weld the stabilizer kit on truck hitch, either on the side or bottom of the hitch rails. The GEN-Y Stabilizer Kit is recommended to be used for all GEN-Y hitches with 12' or more drop length.

This stabilizer kit is compatible with any GEN-Y Drop Hitch. Stabilizer kit works with Gen-Y adjustable ball mounts to brace ball mount and distribute load. For use with mounts that have 2" receivers and 12" or more of drop.

Compatible with standard and torsion Gen-Y mounts. Easy to setup and remove. Bolt bars to shank and insert shank into rear of stacked receivers on ball mount.

Bolt or weld brackets onto vehicle frame. Attach stabilizer bars to brackets with included pins and clips. Remove shank from ball mount and disconnect bars from brackets when not in use.

Adjustable length makes it easy to span the distance between your vehicle and the Gen-Y ball mount. Zinc primer and epoxy powder coat resist corrosion. Application: Gen-Y adjustable ball mounts with 2" x 2" receivers.

Stabilizer bar dimensions: Minimum length (from bolt hole to bolt hole): 24" / Maximum length (from bolt hole to bolt hole): 33". Bracket dimensions: 4-5/8" long x 2-5/8" wide.